Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AKROMID® A3 1 S3 black (1139) - PA66 - Akro-Plastic GmbH

Check here, which other Akromid A datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
模塑收缩率, 平行	1.4 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.6 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	2700 / 1300	MPa	ISO 527
屈服应力	63 / 45	MPa	ISO 527
屈服伸长率	5.6 / -	%	ISO 527
弯曲模量, 23°C	2500 / -	MPa	ISO 178
弯曲强度	90 / -	MPa	ISO 178
简支梁冲击强度, +23°C	N / N	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	17 / 95	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	10 / 13	kJ/m²	ISO 179/1eA
悬臂梁缺口冲击强度, +23°C	15 / -	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度	12 / -	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度 - 温度	-40	°C	-
肖氏硬度D	75 / -	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	262 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	70 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	213 / *	°C	ISO 75-1/-2
线性热膨胀系数, 平行	87 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	87 / *	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	1.6 / *	mm	-
灼热丝燃烧指数 (GWFI)	650	°C	IEC 60695-2-12
GWFI - 测试用试样厚度	1.6	mm	-
灼热丝引燃温度 (GWIT)	675	°C	IEC 60695-2-13
GWIT - 测试用试样厚度	1.6	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	1E13 / -	Ohm*m	IEC 62631-3-1
相对漏电起痕指数	600 / -	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
密度	1100 / -	kg/m³	ISO 1183

加工推荐（注塑）	价值	单位	Test Standard
注塑熔体温度	320	°C	-
模具温度	100	°C	-
注射压力	75	MPa	-

函数

典型数据

加工方法

注塑

供货形式

黑色

特殊性能

高冲击韧性的/经抗冲改性的, 经热稳处理的/耐热的

应用

汽车, 电子电气

地区供应

欧洲, 亚太

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.